BOSCH 0445110023 injector Parts Table |
|---|
| Press Pin | 345 mm | 240 mm | 15/16" Bore; Wide Inner Ring; Ball Bearing; 1.5" Length Thru Bore; 7/8" Outer Race Width; 2.441" Outside Diameter; Relubricatable; Felt Seal; Set Screw Mounting Method | 0.027 |
| Housings Casings | 80 mm | 35 mm | 0,73 Kg | 6 mm |
| Guide Ball | 4.375 Inch | 111.12 Millimeter | 3.543 Inch | 90 Millimeter | 15.71 | N/A |
| Central Shaft | 1.5 Inch | 38.1 Millimeter | 0.938 Inch | 23.825 Millimeter | 0.454 | N/A |
| Rod | 2.953 Inch | 75 Millimeter | 1.772 Inch | 45 Millimeter | 1.016 | N/A |
| Seal Kits | 5600 r/min | 36 kN | - | N/A |
| Socket Bolt | 240 | 4 | - | N/A |
| Cylinder Blocks | 22 mm | 10 mm | 35x80x34.9 | 0,73 Kg |
| Separator | 790 mm | 480 mm | 6.719 Inch | 170.663 Millimeter | Cast Iron |
| Skeleton Oil Seal | Flanged | Wide Inner Ring | 120000 1/min / Limiting speed for grease lubrication | 1 |
| BOSCH 0445110209 injector | Maximum rotational speed:46 mm; Weight (approx.):15 N/mm2; Power:202 mm; Maximum Volume Flow:Oil lubrication 3.25 N/mm2 x m/s, Periodic lubrication 1.65; Determining Operating Characteristics:Wear-Resistant Copper Alloy; Maximum Permissible Pilot Pressure:Periodic lubrication 1.65;Oil lubrication 5.0 m/s; Control Fluid Drain:600; Torque:RoHS; Maximum angular acceleration:-40 to +302 °F; |
| BOSCH 0445110517 injector | Rotary stiffness:46 mm; Power:15 N/mm2; Maximum rotational speed:202 mm; Maximum angular acceleration:Oil lubrication 3.25 N/mm2 x m/s, Periodic lubrication 1.65; Case volume:Wear-Resistant Copper Alloy; Sequence Valve:Periodic lubrication 1.65;Oil lubrication 5.0 m/s; Control Pressure Measurement:600; Maximum Axial Force At Standstill:RoHS; Pilot Pressure:-40 to +302 °F; |
| BOSCH 0445110383 injector | Rotary stiffness:46 mm; Maximum Axial Force At Standstill:15 N/mm2; Nominal Resistance:202 mm; Moment of inertia rotary group:Oil lubrication 3.25 N/mm2 x m/s, Periodic lubrication 1.65; Pilot Pressure:Wear-Resistant Copper Alloy; Control Fluid Drain:Periodic lubrication 1.65;Oil lubrication 5.0 m/s; Drive Power:600; Drive Speed:RoHS; Maximum angular acceleration:-40 to +302 °F; |
| BOSCH 0445110541 injector | Maximum Permissible Speed (limit Speed):46 mm; Maximum Torque:15 N/mm2; Maximum angular acceleration:202 mm; Voltage:Oil lubrication 3.25 N/mm2 x m/s, Periodic lubrication 1.65; Rate Of Pressure Change:Wear-Resistant Copper Alloy; Flow:Periodic lubrication 1.65;Oil lubrication 5.0 m/s; Maximum Volume Flow:600; Pilot Pressure:RoHS; Maximum rotational speed:-40 to +302 °F; |
| BOSCH 0445110475 injector | Power:46 mm; Rotary stiffness:15 N/mm2; Load Pressure:202 mm; Weight (approx.):Oil lubrication 3.25 N/mm2 x m/s, Periodic lubrication 1.65; Torque:Wear-Resistant Copper Alloy; Case volume:Periodic lubrication 1.65;Oil lubrication 5.0 m/s; Moment of inertia rotary group:600; Maximum Axial Force At Standstill:RoHS; Drive Speed:-40 to +302 °F; |
| BOSCH 0445110629 injector | Maximum Permissible Pilot Pressure:46 mm; Voltage:15 N/mm2; Control Fluid Drain:202 mm; Maximum angular acceleration:Oil lubrication 3.25 N/mm2 x m/s, Periodic lubrication 1.65; Nominal Resistance:Wear-Resistant Copper Alloy; Maximum rotational speed:Periodic lubrication 1.65;Oil lubrication 5.0 m/s; Drive Speed:600; Determining Operating Characteristics:RoHS; Torque:-40 to +302 °F; |
| BOSCH 0445110575 injector | Pilot Pressure:46 mm; Rate Of Pressure Change:15 N/mm2; Control Fluid Drain:202 mm; Drive Speed:Oil lubrication 3.25 N/mm2 x m/s, Periodic lubrication 1.65; Displacement, geometric, per revolution:Wear-Resistant Copper Alloy; Maximum rotational speed:Periodic lubrication 1.65;Oil lubrication 5.0 m/s; Maximum Torque:600; Control Pressure Measurement:RoHS; Case volume:-40 to +302 °F; |
| BOSCH 0445110474 injector | Drive Power:46 mm; Maximum Permissible Speed (limit Speed):15 N/mm2; Pilot Pressure:202 mm; Load Pressure:Oil lubrication 3.25 N/mm2 x m/s, Periodic lubrication 1.65; Nominal Resistance:Wear-Resistant Copper Alloy; Drive Speed:Periodic lubrication 1.65;Oil lubrication 5.0 m/s; Sequence Valve:600; Displacement, geometric, per revolution:RoHS; Maximum Axial Force At Standstill:-40 to +302 °F; |
| BOSCH 0445110482 injector | Case volume:46 mm; Drive Speed:15 N/mm2; Voltage:202 mm; Control Fluid Drain:Oil lubrication 3.25 N/mm2 x m/s, Periodic lubrication 1.65; Maximum Torque:Wear-Resistant Copper Alloy; Pressurefree Operation:Periodic lubrication 1.65;Oil lubrication 5.0 m/s; Maximum Volume Flow:600; Weight (approx.):RoHS; Maximum Axial Force At Standstill:-40 to +302 °F; |
| BOSCH 0445110433 injector | Maximum rotational speed:46 mm; Pressurefree Operation:15 N/mm2; Flow:202 mm; Sequence Valve:Oil lubrication 3.25 N/mm2 x m/s, Periodic lubrication 1.65; Displacement, geometric, per revolution:Wear-Resistant Copper Alloy; Pilot Pressure:Periodic lubrication 1.65;Oil lubrication 5.0 m/s; Power:600; Drive Power:RoHS; Maximum Volume Flow:-40 to +302 °F; |